High Pressure Water Jetting in Murrieta, CA
Hydro Jetting: Cleaning the Pipe, Not Just the Clog
A drain snake punches a hole through a blockage. Hydro jetting scours the pipe wall itself. High pressure water is fed through a specialized nozzle that strips away the grease, scale, soap buildup and root matter coating the inside of the line, then flushes the debris out. The difference shows up months later: a snaked line often clogs again in the same spot, because the material that caused it is still there.
When Jetting Is the Right Tool
Jetting earns its keep on lines that clog repeatedly, on kitchen and restaurant lines carrying heavy grease, and on main lines with fine root intrusion. It is also the practical way to clean a long run without opening it up.
It is not always the right answer. Old clay, cast iron or Orangeburg pipe that is already cracked or collapsing can be damaged by the pressure, and a line with a structural fault needs repair rather than cleaning. That is why we run a camera inspection first on anything we have not seen before. The footage tells us whether the pipe is sound enough to jet, and it often reveals the actual cause of the repeat clogs.
What the Process Looks Like
We access the line through an existing cleanout wherever possible, so nothing has to be dug up or removed. The nozzle is fed upstream, then drawn back slowly, cutting and flushing as it returns. Pressure is matched to the pipe material and the blockage, not simply run at maximum. On commercial kitchen lines we usually recommend a scheduled interval, because grease accumulation is predictable and cheaper to manage than to fix.
Because the water pressure involved is genuinely dangerous, this is not a rental job. It should be handled by a licensed plumbing contractor with the right nozzle for the line.
Commercial and Residential
Restaurants, apartment buildings and other commercial properties tend to need jetting on a schedule because of volume. Homes usually need it once, to reset a line that has been snaked repeatedly without lasting results. Either way, we can tell you afterward what the line looked like and how long it should hold.
Contact Us
If a drain keeps backing up after being cleared, the clog is not the problem, the pipe wall is. Call Family Plumbing, Heating & Air at 866-693-2645 to talk through whether jetting or standard drain cleaning fits your situation. We answer 24 hours a day.
Frequently Asked Questions
Is hydro jetting safe for older pipes?
Not always, and that is worth checking first. Pressure that cleans a sound line can damage clay, Orangeburg or badly corroded cast iron that is already cracked. We run a camera inspection before jetting an unfamiliar line so the decision is based on the actual condition of the pipe.
How is jetting different from snaking?
A snake breaks through the blockage and restores flow. Jetting strips the buildup off the pipe wall and flushes it out. If a drain has been snaked several times and keeps clogging in the same place, the coating on the pipe is the reason, and that is what jetting removes.
How often should a commercial kitchen line be jetted?
It depends on volume and what goes down the line, but grease accumulation is predictable enough that most busy kitchens do better on a set schedule than waiting for a backup. We can suggest an interval after seeing the line.